Inderdaad heel mooi! Jammer dat ik 2 weken geleden die andere dayline koplampen heb gemonteerd met xenon en alles!
En nog steeds geen foto's heb gepost of wel???
als de nieuwe versie inderdaad plug en play zijn wil ik ze graag ,maar twijfel of dat inderdaad zo is met zo veel verschillende polos met verschillende dagrijverlichting posities,bij mij wordt de h7 lamp namelijk gedimd
My car has bi-xenon with LED parking/DRL lights. There are halogen cornering lights integrated in the main headlights. Separate fog lights are situated lower down, and these only act as fogs since DRL and cornering lights are integrated in the main headlight unit.
The car came factory configured with only the front LEDs on as DRL (ignition on, light switch in "0" position). No other lamps are on with the DRLs. The corresponding bit status of the Byte 23 is 01000001.
I then played with the long coding helper for the Byte 23. This is what I discovered:
- changing bit 4 from 0 to 1 switches off the LEDs
- changing bit 3 from 0 to 1 selects low beam xenon as DRL (plus LEDs are switched off)
- changing bit 2 from 0 to 1 selects cornering lights as DRL (plus LEDs are switched off)
- changing bit 6 from 1 to 0 turns off any of the three above DRL light sources. This bit would seem to be the "master" DRL enable/disable switch?
- changing bit 7 from 0 to 1 switches off the LED DRL on the side where indicator is blinking. Didn't test this bit with the other DRL light sources, but may well be that this switching off is for the LED strip only? With this setting the LEDs on that side didn't dim but shut off completely. I believe that a dimming function could be achieved together with some other bit (yet to be discovered in some other Byte)?
Nieuwe versie is met stelmotorwatk zoo jmmr vind is dat er geen stelmotor bij zit!
Sooooo, laut DHL Sendungsbenachrichtigung kommen meine Scheinwerfer morgen!
Je bekijkt het forum op dit moment als gast. Als gast op dit forum kun je veel berichten gewoon lezen, maar je hebt niet de volledig toegang tot alle inhoud.
Wil je wel alles kunnen zien en kunnen reageren op topics , dan zul je je eerst moeten registreren op ons forum.